Expert Answers about CrossRoads
- Can Rhino-Rack Aero Bar Roof Rack From 2012 GMC Sierra be Installed on 2015 GMC Sierra
- If you currently have the Rhino-Rack Vortex Aero Bar System that consists of the 54 inch Vortex Bars in Black # RRVA137B-2 or Silver # RRVA137S-2, the 2500 Series Legs # RRRLKVA, and the # DK227 Fit Kit, then the only additional item you need to transfer this to your new 2015 Sierra is a new Fit Kit.
Your existing # DK227 Fit Kit will not work on the 2015 Sierra and you will instead just need the DK Fit Kit # DK377. You can still use your current crossbars and legs.
view full answer... - Recommended 5th Wheel Hitch for a 2019 Chevy Silverado 2500 w/ OEM Tow Package
- For your 2019 Chevy Silverado 2500 with the OEM puck system I recommend going with the B&W Companion 5th wheel line of hitches because of their American-made heavy-duty construction, ease of use, and how satisfied other customers are with this hitch.
The Companion comes in a 20K item # BWRVK3770 sliding version if you have the 6-1/2' bed but if you have the 8' bed then there is both a 20K item # BWRVK3700 and a 25K item # BWRVK3705 option. Two of the most noticeable features of this 5th...
view full answer... - Cargo Weight Capacity of Hitch Carrier Used on Honda CR-V
- It sounds like you have a lot of cargo to transport in and on your Honda CR-V. Hitch carriers like the 22-1/2x49 Curt Cargo Carrier # C18113 are a great way to move heavy cargo items that might be too difficult to get up on your roof. Most vehicle roofs are limited to a weight rating of 165-lbs or less and this is only a fraction of the weight that can be carried on a hitch carrier.
But these hitch carriers are not intended to hold a large rooftop cargo box. The issue is that such a cargo...
view full answer... - Hitch Pin Holes on Draw-Tite Hitch Do Not Line Up
- The Draw-Tite hitch has one set of holes for your hitch pin to go through. There is an extra hole on one side in case you decide to use the optional Tow Ready # 63201 J-pin lock set and anti-rattle device instead of a standard hitch pin. While I am not right there to see the issue, I suppose it is also possible that your bike rack has a 1-1/4" square shaft that you are trying to put in a 2" receiver. Most 1-1/4" bike racks come with an adapter for 2" receivers. If yours does not you could...
view full answer... - Recommended Heavy Duty Shackles for Tandem Axle Trailer
- We do have some more heavy-duty type shackle kits and for that I recommend one of the following from MORryde based off of the length of your shackles:
- 2-1/4" Shackles # MR58ZR
- 3-1/8" Shackles # MR76ZR
The shackles that come with these kits are 1/2" thick so they will be much more durable than your current shackles.
view full answer... - What Reese Sidewinder Do I Need For a 2013 Keystone Montana 338DB 5TH Wheel With 1716 Pin Box?
- The Reese Sidewinder 5th Wheel King Pin # RP77FR will fit your 2013 Keystone Montana High Country 338DB with the 1716 pin box. This includes the correct spacer kit to fit your Montana.
With either of these you will want to ensure that your 5th wheel hitch is compatible with the pin box. You cannot use a Curt Q or A Series fifth-wheel hitch, PullRite SuperGlide fifth-wheel hitch, Reese Trail Boss fifth-wheel hitch, B&W Companion fifth-wheel hitch that mounts in the Turnoverball gooseneck...
view full answer... - Replacement Air Lift Wireless Controller For First Generation Air Lift WirelessAir Compressor System
- For the first generation of the Air Lift WirelessAir compressor systems you will need the Replacement Wireless Remote AL73002.
The Replacement Remote Control # AL39NV will only work for the Air Lift WirelessONE Compressor System # AL25980 or # AL25980EZ
view full answer... - Torsion Axle Lift Kit For a 2011 Forest River Rockwood Signature Ultra Lite 8244S 5TH Wheel Camper
- You may be able to combine a torsion lift kit and larger tires and wheels to get you close to the 4" lift that you are looking for. Currently there is not a torsion lift kit that will raise your 2011 Forest River Rockwood 8244S that much.
I've had a bit of a hard time figuring out exactly what axles are under your Rockwood. I do know that they are 3,500lb axles which narrows down the possibilities. You may have a Dexter #10 Torflex. You can determine if you have this by measuring the...
view full answer... - Parts Needed To Add a Air Tank And In-Cab Gauge To Air Lift WirelessAIR Compressor System
- If you are planning to use a Air Tank # F9126 with your Air Lift WirelessAIR Compressor System # AL74000EZ you will need some fittings and air line to get a gauge installed.
Between the compressor and manifold on the Air Lift WirelessAIR you will need to install a Air Lift Union Tee # AL21838 so that the air tank will be filled by the compressor directly. From there some Air Lift 1/4" Synflex Air Line # AL73RV will attach from the compressor to the air tank with a 1/4" Elbow # AL21837....
view full answer... - What Is The Difference Between The Curt # C77NR And # C37BR Trailer Hitch Receivers
- Although both the Curt # C77NR and # C37BR both look to be identical there is a small difference in the # C77NR that allows it to be compatible with 2022 and 2023 Kia Niro models, whereas the # C37BR is only compatible with 2022 models.
view full answer... - Air Bags & Wireless Compressor For 2020 Ford F-350 FX4 Single-Wheel 4WD For Helping Squat
- We can get your 2020 Ford F-350 FX4 with single rear wheels and 4WD set up with exactly what you want, which are air bags and a wireless compressor system. The air bags that fit your truck are from Air Lift, and are the following part number:
- Air Lift LoadLifter 5000 Air Helper Springs # AL23FJ
The # AL23FJ will absolutely help with the squat you are experiencing when you are towing, and really high-quality like you are looking for. Also, to avoid any leaks when installing the air bags...
view full answer... - Troubleshooting Tekonsha Prodigy RF Not Pairing on 2013 Viking Travel Trailer
- After the countdown is it showing c.E. again? If so, check your 7-way to make sure you have constant 12V power running to the unit. Assuming you have 12V power here the Tekonsha Prodigy RF will have power as well. If you're worried about it you could also test the 7-way for power on the unit itself where you plug the trailer in.
If you're getting a different readout on the display it is possible something else is wrong, but I would need the error code to troubleshoot that. Assuming you...
view full answer... - Troubleshooting Reese Goose Box Not Allowing Air Into System To Fill Air Spring
- First there could be a couple issues since you are saying your Reese Goose Box # RP85FR is not accepting air. On the end of the valve is a core. This core could be damaged and not allowing air to enter into the system. There are Core Tools # CA88FR which will allow you to remove the core and inspect/replace if it is damaged and not allowing air into the system. Another issue could be the Air System Service Kit RP86007 is faulty and stopping air from entering or letting air out. If your...
view full answer... - Is The Curt A25 5th Wheel Hitch For Ram Compatible With A 2023 Ram 3500 With OEM Prep Package
- The Ram puck spacing has not changed with the 2023 models so the Curt A25 5th Wheel Trailer Hitch for Ram Towing Prep Package # C16046 would be a compatible fit with your 2023 Ram 3500 DRW. I've attached a short video below where Shane will walk you through the installation process and go over some of the features of this hitch.
view full answer... - Recommended Roof Rack for 2016 Lexus RX 350 With Flush Factory Rails for Roof Top Tent
- For your 2016 Lexus RX 350 with factory with flush mounted rails that run front to back, I suggest the Rhino-Rack Vortex Aero Crossbars, # RRVA137S-2 mounted with the Rhino-Rack SX Series Legs, # RR37QX. This will provide a dynamic weight/moving load capacity of up to 165 lbs. so this meets the need of your Roof Top Tent. When used stationary or static they will accommodate higher weights.
When used in this fashion with a roof top tent the vehicles roof is typically going to be the weakest...
view full answer... - Convert Motorhomes 4 Way To 7 Way And Install Charge Line For Towed Vehicle Battery
- If you do not have a 4 way flat and just have 4 wires at the back of your motorhome, then use Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector w LED Test Lights - Vehicle End # HM48190. This will connect your 4 wires to a 4 way flat plug. Once you have a 4 way flat, you can convert to 7 way with Buyers Products Trailer Connector Adapter - 4-Way to 7-Way RV and 4-Way Flat # 337TC1474P.
Your 4 way flat will plug into the 4 way harness on this adapter, then you will need...
view full answer... - Recommended Trailer Hitch For A 2023 Toyota Highlander Limited Hybrid With A 20" Spare Tire
- The Curt Trailer Hitch Receiver # C99FR will only work with 18" or smaller spare tires. You would need to use a hitch like the EcoHitch Hidden Trailer Hitch Receiver # EH35VR instead.
view full answer... - Recommended Replacement Cab Lights for 2011 Winnebago Adventurer Motorhome
- I might have some options for you to replace the cab lights on your 2011 Winnebago Adventurer but we unfortunately don't know what ones you have currently. I looked up some photos online and they look very similar to the LED Trailer Clearance or Side Marker Light with Reflex Reflector part # 328-K-51 so these might be a good option for you. They measure 4" long x 1-1/2" tall so as long as they match your existing they will be a great fit.
I have attached a list of other options below...
view full answer... - Parts Needed For Towing a Trailer With Electric Brakes by a 2018 Ford Explorer Without Tow Package
- The etrailer Trailer Hitch Receiver # e98867 is the correct receiver for your 2018 Ford Explorer. This class III 2" receiver is rated for 400lbs of tongue weight and a trailer weight of 4,000lbs. With a weight distribution hitch capacities increase to 500lbs of tongue weight and 5,000lbs trailer weight.
The wiring is where things can be confusing. As your Explorer does have the correct connectors for the Curt T-Connector Vehicle Wiring Harness # C56306 as well as the Plug-In Wiring Adapter...
view full answer... - Will etrailer Trailer Hitch Receiver Fit 2021 Audi Q5 Plug-In Hybrid
- Yes, the etrailer Hitch # e94CR will fit your 2021 Audi Q5 PHEV. This is a Class III hitch with a 2" receiver. It features a bolt-on installation and comes with a limited lifetime warranty. It also has a concealed cross tube so only the receiver will be visible at the back of your vehicle.
If you plan on doing some towing, I recommend the ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT for wiring. This wiring harness uses zero-contact interface sensors to identify the current...
view full answer...
Go To Results